View FX8C-120120P11-SV1J_605694.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

0.6mm Pitch Stacking Height 3mm to 16mm Connector
FX8, FX8C Series
FX8 Series FX8C Series
Note that FX8 series and FX8C series are not mated with each other.
sFeatures
1. Stacking Height 3mm to 16mm available
The board to board stacking height can correspond to 3mm~16mm.
qStacking Height 3,4mm-FX8 Series
2. SMT Coplanarity
The coplanarity of the SMT solder area lead is maintained at the high accuracy of less than 0.1mm.
3,4mm
3. Mating Guide
The very small and guide rib is provided, and secures 0.6mm self-alignment, considering the mating operativity into accounts.
4. Mis-insertion Prevention
The boss prevents mis-insertion in the board to cause due to the boss position and boss diameter.
qStacking Height 5 to 16mm-FX8C Series
5. Two-piece Connection Product
In order to enhance the mating reliability for the fine pitch connector using two-pieces, the two-pieces of connectors are combined by our unique method, and can secure the mount position accuracy. In such a new concept, the two-piece connected product is prepared at every number of contacts (The standard mating pitch for the two-piece interconnected product in two rows is 11mm.)
5 to 16mm
sApplications
Note pc, business equipments, which require miniaturization or light-weight
A226
FX8 Series sProduct Specifications
Rating Current rating 0.4A Voltage rating 100V AC Operating Temperature Range -55c to +85c Note 1. Operating Humidity Range -40% to 80% Storage Temperature Range -10c to +60c Note 2. Storage Humidity Range 40% to 70% Condition 250V DC 300V AC/1 minute 100mA
Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Vibration 6. Temperature Cycle 1000M ohms min
Specification
No flashover or insulation breakdown.
45m ohms max.
No electrical discontinuity of 1s or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 55m ohms max.: Insulation resistance: 100M ohms min. 96 hours at temperature of 40c and humidity of 90% to 95% Contact resistance: 55m ohms max.: Insulation resistance: 100M ohms min. (-55c: 30 minutes, 15 to 35c: 2 to 3 minutes (-85c: 30 minutes, 15 to 35c: 2 to 3 minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 55m ohms max. 50 cycles 8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile
Manual soldering: 300c for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part Insulator
Header Contact
Material PBS
Phosphor bronze Contact area Lead area Contact area Lead area
Finish Light brown
Gold plated Tin-lead plated Gold plated
Remarks
UL94V-0
------- -------
Receptacle Contact
Phosphor bronze
Note : The black dots on the insulater will not affect performance.
sOrdering Information
qSingle Product
FX8
q
- 120 P - SV 1 (22)
w e r t y 1 : +1mm y Package Form None (21) : Tray package product : Tube packaging product t Product height variation None...Standard (Minimum low profile)
q Series Name : FX8 w Number of Contacts :60, 80, 90, 120, 140 e Connector type r Contact type P : Header S : Receptacle SV : Board vertical type
(22) : Emboss tape package product *The embossed tape packaging product is prepared for all number of contacts, except for 140 contacts.
qtwo-pieces Connection Product
q Series Name
FX8
q :FX8
- 120/120 P 11 - SV 1 J
w e r t yu SV...Board vertical type 1 : +1mm u J: two-pieces connection product r Connector to Connector Pitch t Contact type :
w Number of Contacts: 602, 802, 902, 1002, 1202, 1402 Example: 120/120 = 240 contacts e Connector Type : P : Header
y Product height variationBlank:Standard (Minimum low profile)
S : Receptacle *The standard delivery packaging of the two-piece connection product is the tray packaging.
A227
BStacking Height Variation
qSingle Product
FX8-**P-SV FX8-**S-SV 3mm FX8-**P-SV1 4mm
3 to 4
qtwo-pieces Connection Product
FX8-**/**P11-SVJ FX8-**/**S11-SVJ 3mm FX8-**/**P11-SV1J 4mm
BMating Sectional View
(The above illustration represents the stacking height 3mm type.)
A228
sHeader (Single Product) s[FX8-**P-SV]
Unit: mm Part Number
FX8-060P-SV(**) FX8-080P-SV(**) FX8-090P-SV(**) FX8-100P-SV(**) FX8-120P-SV(**) FX8-140P-SV(**)
CL No.
578-0001-6-** 578-0003-1-** 578-0004-4-** 578-0005-7-** 578-0006-0-** 578-0007-2-**
Number of Contacts
60 80 90 100 120 140
A
24.60 30.60 33.60 36.60 42.60 48.60
B
23.00 29.00 32.00 35.00 41.00 47.00
C
20.70 26.70 29.70 32.70 38.70 44.70
D
17.40 23.40 26.40 29.40 35.40 41.40
E
22.20 28.20 31.20 34.20 40.20 46.20
Tube packaging Quantity (Pieces)
21 17 15 14 12 10
**None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packaging product
Note 1: To order the tube packaging product, determine a quantity for delivery,multiplying the tube packaging product by an integer. Note 2: The embossed tape package product is prepared for all number of contacts, except for 140 contacts. In addition, the product will be procured by the reel unit at 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details.
s[FX8-**P-SV1]
Unit: mm Part Number
FX8-060P-SV1(**) FX8-080P-SV1(**) FX8-090P-SV1(**) FX8-100P-SV1(**) FX8-120P-SV1(**) FX8-140P-SV1(**)
CL No.
578-0041-0-** 578-0043-6-** 578-0044-9-** 578-0045-1-** 578-0046-4-** 578-0047-7-**
Number of Contacts
60 80 90 100 120 140
A
24.60 30.60 33.60 36.60 42.60 48.60
B
23.00 29.00 32.00 35.00 41.00 47.00
C
20.70 26.70 29.70 32.70 38.70 44.70
D
17.40 23.40 26.40 29.40 35.40 41.40
E
22.20 28.20 31.20 34.20 40.20 46.20
Tube packaging Quantity (Pieces)
21 17 15 14 12 10
**None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packaging product Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube package product by an integer. Note 2: The embossed tape package product is prepared for the entire number of contacts, except for 140 contacts. In addition, the product will be sold by the reel unit when 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details.
A229
sReceptacle (Single Product) s[FX8-**S-SV]
Unit: mm Part Number
FX8-060S-SV(**) FX8-080S-SV(**) FX8-090S-SV(**) FX8-100S-SV(**) FX8-120S-SV(**) FX8-140S-SV(**)
CL No.
578-0201-5-** 578-0203-0-** 578-0204-3-** 578-0205-6-** 578-0206-9-** 578-0207-1-**
Number of Contacts
60 80 90 100 120 140
A
24.60 30.60 33.60 36.60 42.60 48.60
B
23.05 29.05 32.05 35.05 41.05 47.05
C
20.80 26.80 29.80 32.80 38.80 44.80
D
17.40 23.40 26.40 29.40 35.40 41.40
E
22.20 28.20 31.20 34.20 40.20 46.20
Tube packaging Quantity (Pieces)
21 17 15 14 12 10
**None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packageing product Note 1: To order the tube packaging product, determine a quantity for delivery,multiplying the tube packaging product by an integer. Note 2: 0The embossed tape package product is prepared for the entire number of contacts, except for 140 contacts. In addition, the product will be sold per reel when 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details.
BPCB mounting pattern Header Receptacle
A230
sHeader (Two-piece Connection Product) s[FX8-**/**P11-SVJ]
Unit: mm Part Number
FX8-060/060P11-SVJ FX8-080/080P11-SVJ FX8-090/090P11-SVJ FX8-100/100P11-SVJ FX8-120/120P11-SVJ FX8-140/140P11-SVJ
CL No.
578-0101-0 578-0103-6 578-0104-9 578-0105-1 578-0106-4 578-0107-7
Number of Contacts
602 802 902 1002 1202 1402
A
31.70 37.70 40.70 43.70 49.70 55.70
B
24.70 30.70 33.70 36.70 42.70 48.70
C
23.00 29.00 32.00 35.00 41.00 47.00
D
20.70 26.70 29.70 32.70 38.70 44.70
E
17.40 23.40 26.40 29.40 35.40 41.40
F
22.20 28.20 31.20 34.20 40.20 46.20
Note : The two-piece connection product is packaged by tray.
s[FX8-**/**P11-SVJ1J]
Unit: mm Part Number
FX8-060/060P11-SV1J FX8-080/080P11-SV1J FX8-090/090P11-SV1J FX8-100/100P11-SV1J FX8-120/120P11-SV1J FX8-140/140P11-SV1J
CL No.
578-0141-5 578-0143-0 578-0144-3 578-0145-6 578-0146-9 578-0147-1
Number of Contacts
602 802 902 1002 1202 1402
A
31.70 37.70 40.70 43.70 49.70 55.70
B
24.70 30.70 33.70 36.70 42.70 48.70
C
23.00 29.00 32.00 35.00 41.00 47.00
D
20.70 26.70 29.70 32.70 38.70 44.70
E
17.40 23.40 26.40 29.40 35.40 41.40
F
22.20 28.20 31.20 34.20 40.20 46.20
Note : The two-piece product is packaged by tray.
A231
sReceptacle (two-piece Connection Product) s[FX8-**/**P11-SVJ]
Unit: mm Part Number
FX8-060/060S11-SVJ FX8-080/080S11-SVJ FX8-090/090S11-SVJ FX8-100/100S11-SVJ FX8-120/120S11-SVJ FX8-140/140S11-SVJ
CL No.
578-0301-0 578-0303-5 578-0304-8 578-0305-0 578-0306-3 578-0307-6
Number of Contacts
602 802 902 1002 1202 1402
A
31.70 37.70 40.70 43.70 49.70 55.70
B
24.60 30.60 33.60 36.60 42.60 48.60
C
23.05 29.05 32.05 35.05 41.05 47.05
D
20.80 26.80 29.80 32.80 38.80 44.80
E
17.40 23.40 26.40 29.40 35.40 41.40
F
22.20 28.20 31.20 34.20 40.20 46.20
Note 1: The two-piece connection product is packaged by tray.
BPCB mounting pattern Header Receptacle
A232
BDetailed Figure After Joint Removal (two-piece Connection Product) Header
Receptacle
A233
BConnector Precautions for use
1. Tolerance Clearance on Mating Side
The effective contact length of the product is set to 0.7mm. Please use the product so as to set the clearance to less than 0.2mm between the header and the receptacle in the mating process.
2. Fixation between Mounting Boards
The very low profile and compact product, so never fix the connector between boards by mating force only
3. Stacking Height Tolerance for Mating
Stack 3mm Stack 4mm
3 4
+0.3 _0.2 +0.3 _0.2
mm mm
Note: Please Note that the above stacking tolerance doesn't include the solder paste thickness.
4. Handling two-piece connection Product
Both joint bars of the two-piece connection product are fixed by the joint members, but the mating cannot be implemented in that state. Before mating, remove the joint bars as if pull it up. (Don't remove the joint members, before mounting on the board.)
Before removing joint bar
After removing joint bar
5. Mounting Temperature Profile (Reference)
Applicable Conditions Reflow system Solder Test board Metal mask thickness :IR reflow :Paste type 63 Sn/37 Pb (Flux content 11 wt%) :Glass epoxy 161mm x 100mm x 1.6 mm :0.15 mm
Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount.
A234
BPackaging Type
Packaging Type Tube packaging Number of contacts Product Pieces Unit Packaged Sales Tube Total Length Tape Width Product Pitch Embossed Tape Packaging Emboss Reel Diameter Product Pieces Unit Packaged Sales *The above packaging describes about the single product only. In addition, the packaging of the two-piece connection product is packaged by tray. 44mm 44mm 60 contacts 80 contacts 90contacts 100 contacts 120 contacts 140 contacts 21 pieces 17 pieces 15 pieces 14 pieces 12pieces 10pieces Deliver multiplying product pieces (60 contacts: 21, 42...) 550mm2mm 44mm 12mm Refer to the table on catalog page A236. 1000 pieces per reel Per reel 56mm 56mm 72mm
BPackaging Specification [Tube packaging]
qHeader [FX8-**P-SV (21)] [FX8-**P-SV1 (21)]
qReceptacle [FX8-**S-SV (21)]
A235
[Embossed Tape Package]
qEmbossed Carrier Tape Dimensions
[26.2]
*The above pattern represents the receptacle connector case.
[52.4] [56]
Unit: mm P/S Header Receptacle Product No. FX8-**P-SV (22) FX8-**P-SV1 (22) FX8-**S-SV (22) 6.0 8.4 A 5.5 B 7.9 C 3.2 4.2 2.6 12 D E O 330 O 360 O 330 ** : Number of Contacts
qReel Dimensions (FREE)
[58]
A236

▲Up To Search▲

Price & Availability of FX8C-120120P11-SV1J

	To Download FX8C-120120P11-SV1J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .